ACTIVE Air Rentals and Fantech say their temporary ventilation system was used in Channel 10’s hit show MasterChef.
30/07/2009
CHARLES Rogers from KSL Services has written a tip for balancing fans during maintenance of heating, ventilation and air conditioning (HVAC) systems in factories.
14/10/2008
SIEMENS has released the Sinamics G150 Clean Power frequency converter drive for fans, pumps, compressors, extruders, mixers and mills.
20/11/2009
FANQUIP has designed and fitted a system that pumps ambient and fresh air to aid maintenance workers in a 200m long tunnel.
13/05/2008
GE COMMERCIAL Finance is helping St Barbara fund heating, ventilating, air conditioning and refrigeration systems for its Gwalia mine in Western Australia.
29/09/2008
ACTISAFE is offering a workshop service for complete manufacturing and shop-floor planning and fitout.
15/05/2008
FANQUIP says a preventive approach to cooling transformers and generators can help extend the life of these pieces of equipment by up to five times.
15/06/2010
INPRO/SEAL has written about bearing isolators, a non-wear non-contacting type labyrinth seal which extends bearing life.
06/08/2008
FANQUIP says it now provides a roof safety analysis to ensure servicing operations of roof-mounted ventilation systems are compliant with WorkCover expectations.
06/08/2009
FANQUIP has launched a fan maintenance service across all industries, providing a way to regularly check ventilation and heating system to prevent problems.
21/09/2009
ROCKWELL Automation has released a new white paper which tells of how to reduce facilities’ energy consumption with HVAC control upgrade technology.
02/12/2009
MIKE Shekhtman from Goodyear has written on how thermal imagers can help detect electrical problems.
06/01/2009
TOWER Engineering says it is now using Baldor’s RPM AC Direct Drive Cooling Tower Motor and VS1 cooling tower drive in its cooling towers.
06/04/2010
JIM Ralston, Wireless Sales Engineer with ProSoft Technology, has written about using wireless technology to aid preventative maintenance in plants.
09/04/2008
FANQUIP says its transformer cooling fans can extend the operating capacity and life of transformers.
FANTECH says it has updated its Minitube series of duct-mounted axial fans, providing a more streamlined and user-friendly design.
FANQUIP has extended the capability of its turnkey services with solutions to contain noise coming from the operation of industrial fans.
EXIMO has released a range of industrial fans for ventilation, fume extraction and general engineering in the manufacturing, welding and materials handling industries.
FANTECH says its PowerLine EC series of in-line centrifugal fans and the roof-mounted Gamma EC and GL Gamma series have built-in efficient electronic commutation motors.
STORAGE Battery Systems has released a hydrogen gas detector for battery rooms and other industrial environments.
FANQUIP says its electric industrial heater fans are a safer alternative to the gas powered heaters traditionally used in manufacturing and mining.
SKF has released an oil recirculation system for bearing lubrication in hot gas fan applications.
EZI-DUCT has released a 32 page product catalogue featuring all of its latest products, including a range of modular ducting and ducting clamps.
FLUKE has released the Fluke 810 Vibration Tester, claiming it is the most advanced troubleshooting instrument available for vibration.
SKF has released a system which uses laser and image sensing technology for shaft alignment in manufacturing and process applications.
Koloona Ind. Supplies ‘Design Flex’ products from ‘World Magnetics’, The PSF series of Pressure sensors, Vacuum switches and Differential pressure switch sensors provide a broad selection of sensors suitable for HVAC ducting and pressure measuring and ventilation control and negative pressure detection.
ABB Australia has released the ACS850 drive module which it claims has technology to help reduce energy use.
SKF says its Explorer and Energy Efficient (E2) bearings are being used by manufacturers to reduce energy use, maintenance costs, and improve reliability.
Fanquip
Koloona Industries
Test & Measurement
Motors Drives
Robotics Automation
Food Magazine
PACE Today
Logistics Magazine
Electronics News
Mining Australia
Manufacturers' Monthly
FEN
Submit your content to Factory Maintenance
Ana Maria Delgado said: To learn more about LUDECA, INC, visit http://www.ludeca.com/blog
Layher Pty Ltd said: To see more projects using Layher scaffolding and to find out more about Layher scaffolding systems, go to our website www.layher.com.au
Rick Powlden said: The Quattro doesn't work
This site is an essential online source of information and a community where factory maintenance professionals interact.