ARC, Automation.com and ExperTune are holding a root cause identification webcast on 24 May 2010, 10am EDT (midnight, 24 to 25 May 2010, EST).
28/04/2010 |
PENNY Melrose, CEO of Datastick, has looked at how traditional problems in vibration analysis can be addressed with new technology.
12/01/2010 |
ISOFLEX Technologies International has won a $70,400 in COMET funding after developing vibration analysis and isolation systems.
17/12/2009 |
ADVANCED Technology Testing and Research (ATTAR) has reported on the Condition Monitoring and Lubrication National Forum.
16/12/2009 |
OLYMPUS has released the COBRA manual scanner, part of an inspection solution for circumferential welds in pipes with diameters down to 21.3mm.
11/12/2009 |
THE VIBRATION Institute of Australia is holding the one-day Condition Monitoring for Management course in Melbourne on 15 February and in Pilbara on 2 March 2010.
09/12/2009 |
US-BASED Dickson has released an online guide to all aspects of instrument calibration for temperature/humidity chart recorders and data loggers.
13/11/2009 |
VOLTECH has released PM1000+ Precision Power and Energy Analyser software for pre-compliance testing for harmonics, inter-harmonics and flicker.
04/11/2009 |
ENDRESS+Hauser has released the TOCII CA72 analyser for continuous and batch monitoring of industrial wastewater.
04/11/2009 |
DATASTICK says many factories are experiencing budget cuts or slow approvals for new capital equipment or upgrades, and will need to lengthen the life of equipment.
30/10/2009 |
PANAMETRICS has released the OxyTrak 390 flue gas oxygen analyser, allowing burner air supply adjustments for maximum combustion efficiency.
29/10/2009 |
THE APT Group is holding a precision maintenance course in May 2010, training attendees on extending machinery life and preventing machine failures.
02/10/2009 |
FLUKE has released the Fluke 27 II and 28 II digital multimeters which are designed to survive water, dust and rough handling.
02/10/2009 |
SIRF Rt has highlighted the post-forum workshops which will be offered alongside its Condition Monitoring and Lubrication National Forum 2009.
10/09/2009 |
HONEYWELL has signed an agreement with Synengco which will allow Honeywell to licence and sell the SentientSystem suite of utility optimisation applications.
09/09/2009 |
PTRONIK has released details of its installation of a pMC dust extraction master controller at a cement factory in NSW.
26/08/2009 |
MOBIUS says its iLearnVibration and iLearnAlignment computer and web-based training courses has cemented its specialty in predictive maintenance training.
15/06/2009 |
PACIFIC Sensor Technologies has released the PST-ThermoVault1000-P high temperature data logger from Madgetech.
02/06/2009 |
IFS Australia says companies should use enterprise resource planning solutions to manage maintenance contractors.
21/05/2009 |
APT Group is holding two training events, a Precision Maintenance course, and a Motor Diagnostics workshop.
21/04/2009 |